|
TAKING ON WATER (FLOODING/SWAMPING)
A smart boater will periodically check the bilge area of the boat to check
for any signs of water.
- Water can enter a boat either through a hole in the hull, leaking
gaskets, or because a fitting or hose has broken.
- Do not panic! If not already on, put on your PFD.
- If the bilge pump is not turned on, turn it on. If you don’t have a
bilge pump, have someone start removing the water by any means available.
- Determine where the water is coming from. If you can repair the problem, do
it.
- Call Marine Rescue.
- If possible, drive the boat toward shallow water.
On smaller boats (under 16’), if the flooding is being caused by water coming
in through the boat plug opening, keep the engine running and head toward the
nearest shore or shallow water.
- By moving forward at a medium speed to high speed, the water will
accumulate in the lowest portions of the boat, generally in the stern area,
and the vacuum created will draw the water out of the boat.
- If you can’t get to shore or into shallow water, it is time to let
marine rescue personnel know of your problem.
|
